Shower Stall Cost: 2026 Installed Price Calculator

Shower stall cost ranges from $1,800 – $8,000 installed, with most shower-only replacement projects landing in the middle of that range when the drain, valve wall, subfloor, and opening are already workable.

A shower stall is a shower-only enclosure. It may be a prefab unit, a multi-piece wall and base system, or a shower enclosure with a separate pan and door. The job is usually simpler when the new stall stays in the same footprint and the existing plumbing does not need to move.

Cost Calculator

Shower Stall Cost Calculator

Estimate installed shower stall pricing based on stall size, wall system, shower base, drain alignment, valve trim, glass door, waterproofing, old shower removal, subfloor condition, access, labor, and local cost factors.

Your estimated cost

For 1 stall

$1,800 – $8,000

About $1,800 – $8,000 per stall

Use your estimate as a starting point, then compare real prices from local contractors.

Cost itemLow estimateHigh estimate
Materials$720$5,200
Labor$1,080$2,800
Estimated shower stall cost$1,800$8,000
Installed cost per shower stall$1,800$8,000

Why your price may change

  • Local labor rates vary.
  • Material quality affects the price.
  • Old material removal, repairs, permits, or code updates can add cost.
  • Hard-to-reach areas, complex layouts, rush jobs, or premium contractors may cost more.

Generated ·

Estimate includes local labor adjustments and may differ slightly from rounded national cost examples.

Cost vs Value

Shower Stall Cost vs Value

Shower Stall may recover about 10%–30% of its cost.

Cost recovered 10%–30% 20% average estimate
You may spend$1.8k–$8k
Value added$180–$2.4k

Bottom line: A shower stall replacement works best when the project stays in the same footprint and the drain, valve wall, subfloor, and opening are already workable. The price rises quickly when the installer has to move plumbing, repair framing, rebuild waterproofing, or add a custom glass enclosure.

Worth it: Homeowners replacing an old shower-only stall, upgrading a small bathroom, converting a worn shower enclosure, or refreshing a guest bath without building a custom tile shower.

Skip it: If the bathroom needs plumbing relocation, framing repair, or a custom tile shower, a basic shower stall estimate will be too low.

ROI ranges are planning estimates and should not be treated as an appraisal. This is only an estimate. Real resale value depends on your home, neighborhood, market, project quality, and buyer demand.

Contractor Reality Check

A shower stall estimate is reliable only when the bathroom opening, drain, valve wall, and subfloor are ready for the new unit. Once the installer has to move plumbing, rebuild framing, repair rot, or add a custom glass enclosure, the project leaves basic shower stall pricing.

My rule of thumb: confirm the stall size, drain location, valve wall, base support, and door plan before choosing the shower unit.

What to Confirm Before You Sign

  • Stall size: confirm the width, depth, height, curb style, and finished opening size.
  • Wall system: ask whether the quote includes prefab walls, separate panels, tile, or another surround system.
  • Shower base: confirm whether the base or pan is included and whether it matches the existing drain.
  • Valve trim: ask whether the shower valve, trim plate, and shower head are included.
  • Waterproofing: confirm how the walls, base, curb, corners, and seams will be sealed.
  • Door or enclosure: ask whether the price includes a curtain rod, framed door, frameless glass, or no enclosure.
  • Buffer: budget 10% to 20% for drain changes, framing repair, subfloor repair, waterproofing, wall repair, or door upgrades.

Surprise Costs That Move the Price

Item Why It Adds Cost Typical Add
Old shower removal Removing an old stall, tile shower, glass, base, or damaged backer can add labor. $400 – $2,000+
Drain relocation The new shower base may not match the existing drain position or height. $500 – $2,500+
Valve replacement Older shower valves may need replacement to fit new trim or current plumbing expectations. $400 – $1,800+
Framing or wall repair Rot, bowed studs, damaged drywall, or out-of-square openings can stop a clean stall install. $500 – $4,000+
Glass shower door Adding a framed or frameless glass door can change both material and labor costs. $800 – $3,500+

Shower Stall Cost by Type

Type Installed Cost Best For
Basic prefab shower stall $1,800 – $4,000 Simple replacements where the opening and drain already match.
Multi-piece shower stall $2,500 – $6,000 Remodels where a one-piece unit will not fit through the home.
Shower stall with glass door $3,500 – $8,000+ Bathrooms getting a new base, walls, and door system together.
Shower stall with plumbing changes $4,500 – $10,000+ Jobs that need drain, valve, shower head, or supply line adjustments.
Custom shower stall rebuild $7,000 – $18,000+ Projects with framing repair, waterproofing rebuilds, tile, or custom glass.

Is a Shower Stall Worth It?

A shower stall is worth it when you want a shower-only setup, a faster replacement than a custom tile shower, or a cleaner enclosure for a small bathroom, guest bath, rental unit, or basement bathroom. It works best when the new stall stays close to the existing footprint.

Skip it: If the bathroom needs plumbing relocation, framing repair, or a custom tile shower, a basic shower stall estimate will be too low.

References – Shower Stall Cost

  1. Bathroom Planning Reference: National Kitchen and Bath Association
  2. Plumbing Fixture Reference: International Association of Plumbing and Mechanical Officials
  3. Wet Area and Tile Reference: Tile Council of North America
  4. Labor Wage Data: Occupational Employment and Wage Statistics, U.S. Bureau of Labor Statistics
  5. Labor Burden Data: Employer Costs for Employee Compensation, U.S. Bureau of Labor Statistics

Last Updated: 6/22/26

90 people found this helpful. Was this guide helpful to you?

Share your project cost

Help other homeowners compare real project prices. Submissions are reviewed before publishing.