Vinyl Siding Cost: 2026 Installed Price Calculator
Mike Martin, MA CSL, is the founder and construction cost editor of RemodelingExpense. His residential construction experience informs the site’s cost research, calculators, and homeowner project guidance.
Vinyl siding cost runs about $6 to $15 per square foot installed for most homes, so a typical 2,000 square foot project lands around $12,000 to $30,000. Where you fall in that range comes down to removal, trim, wall repairs, siding style, panel thickness, number of stories, and local labor rates.
Enter your ZIP code and square footage to estimate your project.
Not sure what square footage to enter? Vinyl siding is priced by outside wall area, not indoor living space. As a rough shortcut, many 2,000 square foot homes need about 2,000 to 2,600 square feet of siding once walls, gables, cuts, laps, and waste are included.
Cost Calculator
Vinyl Siding Cost Calculator
Vinyl siding cost depends on removal, trim, wall repairs, siding style, panel thickness, number of stories, and local labor rates.
Your estimated cost
For 2,000 sq. ft.
$12,000 – $30,000
About $6 – $15 per sq. ft.
Use your estimate as a starting point, then compare real prices from local contractors.
| Cost item | Low estimate | High estimate |
|---|---|---|
| Material | $5,000 | $11,000 |
| Labor | $7,000 | $19,000 |
| Estimated installed cost | $12,000 | $30,000 |
| Installed cost per sq. ft. | $6 | $15 |
Why your price may change
- Local labor rates vary.
- Material quality affects the price.
- Old material removal, repairs, permits, or code updates can add cost.
- Hard-to-reach areas, complex layouts, rush jobs, or premium contractors may cost more.
Estimate includes local labor adjustments and may differ slightly from rounded national cost-per-square-foot examples.
Vinyl Siding Cost vs Value
Vinyl Siding may recover about 60%–80% of its cost.
Bottom line: Vinyl siding can improve curb appeal and reduce exterior maintenance, but the best return usually comes when the old siding is faded, cracked, loose, leaking, or due for replacement.
Worth it: Homes with worn, faded, cracked, loose, or leaking siding where full exterior replacement makes sense.
Skip it: Homes where the existing siding is still in good shape or only needs cleaning, trim repairs, paint touch-ups, or small panel repairs.
ROI ranges are planning estimates and should not be treated as an appraisal. This is only an estimate. Real resale value depends on your home, neighborhood, market, project quality, and buyer demand.
Contractor Reality Check
The cheapest vinyl siding quote is usually cheap for a reason. Two siding quotes can be thousands of dollars apart and both can still be honest. One contractor may be pricing a basic panel install. Another may be pricing the full exterior package with removal, trim, cleanup, and repairs built in.
My rule of thumb: if one quote comes in much lower than the rest, do not assume you found a deal. Find out what is missing first.
What to Confirm Before You Sign
A good siding quote is easy to read. If any of these are missing or vague, ask before you commit:
- Old siding removal: is tear-off and haul-away included, or billed separately?
- Weather barrier: is new house wrap part of the price?
- Trim details: are window wraps, J-channel, corner posts, soffit, and fascia included or extra?
- Wall repairs: what happens if they find rotten sheathing once the old siding is off?
- Panel spec: what brand, style, thickness, and profile are being installed?
- Waste factor: confirm whether the quote includes extra material for cuts, laps, gables, and mistakes.
- Cleanup: are dumpster, disposal, and permit fees in the number?
- Buffer: budget an extra 7% to 15% for surprises and difficult access.
Surprise Costs That Move the Price
These are the items that push a quote above the basic per-square-foot number, and roughly what they add.
Labor can also rise when the job needs extra tear-off time, a dumpster, hard ladder access, second-story work, or repairs behind the old siding.
| Item | Why It Adds Cost | Typical Add |
|---|---|---|
| Old siding removal | Labor, disposal, and dump fees, often separate from the install | $1 to $2 per sq. ft. |
| Rotten sheathing | Soft plywood or OSB must be replaced before new siding goes on | $125 to $250 per 4×8 sheet |
| Insulation board | Fan-fold or foam backing adds material and labor | About $1 per sq. ft. |
| Window wraps | Aluminum bending and trim work around each opening | Varies by opening |
| Soffit and fascia | Usually priced apart from the main wall siding | $10 to $20 per linear ft. |
| Two-story access | Staging, ladders, and rooflines slow the crew down | Varies by layout |
Vinyl Siding Cost by Style
Basic lap siding is the cheapest option. Insulated, shake, board-and-batten, and stone-look profiles cost more because the material costs more and the install takes longer.
| Style | Installed Cost per Sq. Ft. | Best For |
|---|---|---|
| Basic lap | $6 to $10 | Affordable full-home siding |
| Dutch lap | $7 to $12 | A deeper shadow-line look |
| Insulated vinyl | $8 to $15 | Better panel strength and R-value |
| Board and batten | $8 to $15 | Vertical and modern farmhouse looks |
| Scalloped | $8 to $14 | Victorian homes, gables, accents |
| Vinyl shake | $9 to $16 | Gables and curb-appeal accents |
| Stone or brick-look | $9 to $18 | Accent walls and upgraded curb appeal |
Vinyl Siding Cost by Thickness
Vinyl siding thickness affects price and strength. Thinner panels cost less, while thicker panels cost more and usually hold up better.
| Panel Type | Typical Thickness | Best For | Cost Impact |
|---|---|---|---|
| Builder grade | About .040 inch | Lowest upfront price | $6 to $8 per sq. ft. |
| Standard residential | About .042 to .044 inch | Most average homes | $7 to $11 per sq. ft. |
| Premium vinyl | About .046 to .052 inch | Better impact resistance and curb appeal | $9 to $14 per sq. ft. |
| Insulated vinyl | Panel plus foam backing | Stronger panels and added R-value | $8 to $15 per sq. ft. |
If two quotes are far apart, check the panel thickness before comparing price. A cheaper quote may be using thinner siding, fewer trim details, or a more basic profile.
Vinyl Siding Cost by Project Size
The more siding area your home has, the more panels, trim, fasteners, and labor the job needs. These examples use estimated siding square footage, not indoor living space.
| Project Size | Estimated Installed Cost |
|---|---|
| 1,000 sq. ft. | $6,000 to $15,000 |
| 1,500 sq. ft. | $9,000 to $22,500 |
| 2,000 sq. ft. | $12,000 to $30,000 |
| 2,500 sq. ft. | $15,000 to $37,500 |
| 3,000 sq. ft. | $18,000 to $45,000 |
| 3,500 sq. ft. | $21,000 to $52,500 |
| 4,000 sq. ft. | $24,000 to $60,000 |
Is Vinyl Siding Worth It?
Vinyl siding is worth considering when your current siding is faded, cracked, loose, or leaking. It can improve curb appeal and cut down on exterior upkeep.
It is not worth replacing siding that is still in good shape just for looks. Cleaning, spot repairs, or fresh trim paint may cost much less.
References – Vinyl Siding Cost
- Cost Data: 2026 National Home Improvement Estimator, Craftsman Book Company
- Cost Data: 2026 Residential Costs Book with RSMeans Data, Gordian
- Material Pricing: Vinyl Siding Panels and Siding Accessories, Home Depot, 2026
- Material Pricing: Vinyl Siding Trim, J-Channel, and Accessories, Lowe’s, 2026
- Labor Wage Data: Occupational Employment and Wage Statistics, U.S. Bureau of Labor Statistics, May 2025 data released May 2026
- Labor Burden Data: Employer Costs for Employee Compensation, U.S. Bureau of Labor Statistics, 2026
Last Updated: 7/5/26
1423 people found this helpful. Was this guide helpful to you? What Homeowners Reported Paying
Vinyl siding in Attleboro, MA
- Reported cost: $21,500
- Project size: 2,400 sq. ft.
- Material: Certainteed
- Install type: Pro installed
“We had a vinyl siding installed with our windows wrapped in aluminum. Our old vinyl siding was cracked and aged. It was probably put on when the house was built in the late 80’s. We really love the new look.”