Aluminum fascia cost: 2026 Installed Price Calculator
Mike Martin, MA CSL, is the founder and construction cost editor of RemodelingExpense. His residential construction experience informs the site’s cost research, calculators, and homeowner project guidance.
Aluminum fascia cost runs about $10 – $24 per linear foot installed, so a typical 150 linear foot project lands around $1,500 – $3,600. The final price depends on aluminum wrap versus full aluminum fascia, trim coil thickness, gutter removal, brake bending, corner details, rake boards, soffit tie-ins, color match, and local labor rates.
Aluminum fascia is a specific type of fascia work. This page focuses on aluminum fascia trim, aluminum-wrapped wood fascia, and lower-maintenance roof-edge upgrades, not basic painted wood fascia replacement.
Enter your ZIP code and linear feet to estimate your project.
Not sure what linear footage to enter? Measure the roof edges where aluminum fascia will be installed. Include gutter runs, eaves, rake boards, gable edges, and any wrapped trim sections included in the quote.
Cost Calculator
Aluminum Fascia Cost Calculator
Aluminum fascia cost depends on aluminum wrap versus full aluminum fascia, linear feet, trim coil thickness, fascia board condition, gutter removal, brake bending, inside and outside corners, rake boards, soffit tie-in, color match, denting, oil-canning, and repair versus covering sound wood.
Your estimated cost
For 150 linear ft.
$1,500 – $3,600
About $10 – $24 per linear ft.
Get Free Local Quotes| Cost item | Low estimate | High estimate |
|---|---|---|
| Material | $600 | $1,350 |
| Labor | $900 | $2,250 |
| Estimated installed cost | $1,500 | $3,600 |
| Installed cost per linear ft. | $10 | $24 |
Why your price may change
- Local labor rates vary.
- Material quality affects the price.
- Old material removal, repairs, permits, or code updates can add cost.
- Hard-to-reach areas, complex layouts, rush jobs, or premium contractors may cost more.
Estimate includes local labor adjustments and may differ slightly from rounded national cost examples.
Aluminum Fascia Cost vs Value
Aluminum Fascia may recover about 50%–70% of its cost.
Bottom line: Aluminum fascia can reduce painting and protect roof-edge trim, but the value depends on existing fascia condition, gutter removal, brake-bent wrap details, corner work, color match, and whether the project covers sound wood or replaces damaged boards.
Worth it: Homes with sound fascia that needs a lower-maintenance wrap, peeling roof-edge trim, gutter-related fascia repairs, rake board updates, or aluminum soffit and trim upgrades.
Skip it: Homes with rotted fascia, damaged rafter tails, or bad soffit edges that need wood repair before any aluminum wrap is installed.
ROI ranges are planning estimates and should not be treated as an appraisal. This is only an estimate. Real resale value depends on your home, neighborhood, market, project quality, and buyer demand.
Contractor Reality Check
Aluminum fascia is often sold as a low-maintenance upgrade, but it should not be used to hide rotted wood. If the existing fascia is soft, split, or pulling away, the damaged boards need repair before wrapping.
My rule of thumb: aluminum wrap is best over sound fascia. Rotted fascia needs replacement first, then aluminum can be installed as the finish layer.
What to Confirm Before You Sign
A good quote is easy to read. If any of these are missing or vague, ask before you commit:
- Scope: confirm aluminum wrap over existing fascia or full aluminum fascia replacement.
- Linear footage: ask how many feet are included and which roof edges are covered.
- Wood condition: confirm how rotted fascia, rafter tails, or soft boards are handled.
- Gutters: ask if gutter removal, reinstallation, or replacement is included.
- Trim coil: confirm thickness, finish, color, and whether pieces are brake-bent on site.
- Corners: ask how inside corners, outside corners, rake boards, and gable returns are finished.
- Buffer: budget an extra 10% to 20% for wood repairs, gutter work, tall access, or custom bending.
Surprise Costs That Move the Price
These are the items that push an aluminum fascia quote above the basic price range, and roughly what they add.
| Item | Why It Adds Cost | Typical Add |
|---|---|---|
| Gutter removal | Gutters often need to come off before aluminum fascia can be wrapped or replaced | $2 – $6 per linear ft. |
| Rotted fascia repair | Bad wood must be replaced before aluminum wrap goes on | $7 – $18 per linear ft. |
| Second-story access | Height, staging, steep roof edges, and ladder work slow down installation | $3 – $8 per linear ft. |
| Custom brake bending | Clean wraps, returns, and corners take more layout and bending time | $2 – $6 per linear ft. |
| Color match upgrade | Special-order colors or heavier trim coil can cost more than basic white aluminum | Varies by supplier |
| Soffit tie-in repair | Damaged soffit edges may need repair before the fascia looks finished | Varies by damage |
Aluminum Fascia Cost by Type
| Type | Installed Cost per linear ft. | Best For |
|---|---|---|
| Aluminum-wrapped wood fascia | $10 – $22 | Covering sound wood fascia with a lower-maintenance finish |
| Full aluminum fascia trim | $12 – $24 | Roof-edge trim upgrades and new exterior trim work |
| Aluminum rake board wrap | $11 – $24 | Gable edges and sloped roofline trim |
| Aluminum fascia with gutter removal | $14 – $28 | Projects where gutters must be detached and reset |
| Repair plus aluminum wrap | $16 – $35+ | Rotted fascia, damaged roof edges, and wood replacement before wrapping |
Aluminum Fascia Cost by Project Size
Aluminum fascia is measured by linear foot, not square foot. These examples use the total length of fascia being wrapped or replaced.
| Project Size | Estimated Installed Cost |
|---|---|
| 50 linear ft. | $500 – $1,200 |
| 100 linear ft. | $1,000 – $2,400 |
| 150 linear ft. | $1,500 – $3,600 |
| 200 linear ft. | $2,000 – $4,800 |
| 300 linear ft. | $3,000 – $7,200 |
Is Aluminum Fascia Worth It?
Aluminum fascia is worth it when the existing wood is sound and you want a lower-maintenance roof edge that does not need regular scraping and repainting.
It may not be worth it if the fascia is rotted, the gutters are failing, or the soffit edge is damaged. In those cases, repair the wood and roof-edge details before wrapping anything in aluminum.
References – Aluminum Fascia Cost
- Material Pricing: Fascia and Exterior Trim, Home Depot
- Material Pricing: Aluminum Trim Coil, Home Depot
- Material Pricing: Fascia and Trim Materials, Lowe’s
- Technical Reference: Roof Drainage and Fascia Details, InterNACHI
- Labor Wage Data: Foundation, Structure, and Building Exterior Contractors, U.S. Bureau of Labor Statistics
- Labor Burden Data: Employer Costs for Employee Compensation, U.S. Bureau of Labor Statistics
Last Updated: 6/19/26
175 people found this helpful. Was this guide helpful to you?